File:Screw vs Bolt.svg
Oreeginal file (SVG file, nominallie 612 × 1,250 pixels, file size: 228 KB)
Ootline
| Descreeption |
English: [English]
A=Screw B=Bolt 1: Tool drive form 1a: Shaft driven 1b: Eccentrically driven 2: Screw head 2a: Head in the mounting material 2b: Head on the mounting material 3:Shaft with thread 3a: Shaft fully threaded 3b: Shaft partly threaded 4: Thread profile 4a: Sharp narrow thread with cutting capacity 4b: Wide thread flattened or rounded 5: Thread spacing 5a: Thread with spaces 5b: Threads against each other 6: Start 6a: Thread at a distance from the beginning 6b: Thread from the beginning 7: Point 7a: Conical sharp point 7b: Flat tip 8: Screw hole size 8a: Screw hole equal to screw shank without thread 8b: Screw hole wider than the screw 9: (Start) Washer 10: Widened premilled hole start 11:Screw hole 11a: Pre-drilled narrow screw hole depends on the material, after which the thread automatically forms its way into the material. 11b: Pre-drilled hole always pre-drilled wider than the screw width 12: (End) Washer 13: Nut with counter thread for fastening The screw drawing was originally from a file made by Wikimedia Commons user Kenfeisel, with a licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license, see this link https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg The bolt drawing is orginially from a file from Pixabay, where the creator has released it explicitly under the license Creative Commons Zero, see this link on Wikipedia Commons https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svgNederlands: A=Schroef B=Bout
1: Gereedschap aandrijvingsvorm 1a: Asaangedreven 1b: Excentrisch aangedreven 2: Schroefkop 2a: Kop in het bevestigingsmateriaal 2b: Kop op het bevestigingsmateriaal 3:Schacht met draad 3a: Schacht volledig bedraad 3b: Schacht deels bedraad 4: Schroefdraadprofiel 4a: Scherpe smalle schroefdraad met snijvermogen 4b: Brede schroefdraad afgevlakt of afgerond 5: Schroefdraad afstand 5a: Schroefdraad met spatie 5b: Schroefdraad tegen elkaar aan 6: Begin 6a: Schroefdraad op afstand van het begin 6b: Schroefdraad vanaf het begin 7: Punt 7a: Conische scherpe punt 7b: Vlakke punt 8: Schroefgat formaat 8a: Schroefgat gelijk aan schroefschacht zonder draad 8b: Schroefgat breder dan schroef 9: (Begin-) Ring 10: Verbrede verzinkte gat 11:Schroefgat 11a: Smalle schroefgat voorboren is materiaalafhankelijk waarna het draad zich vanzelf een weg vormt in het materiaal. 11b: Brede schroefgat altijd voorgeboord 12: (Eind-) Ring 13: Moer met tegendraad voor bevestiging De schroef afbeelding was oorspronkelijk gemaakt door Wikimedia gebruiker Kenfeisel, uitgebracht met een Creative Commons Attribution-Share Alike 3.0 Unported licensie, zie deze link link https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg De bout afbdeeling is oorspronkelijk van een bestand afkomstig van Pixabay, uitgebracht met een Creative Commons Zero licensie, zie deze link op Wikipedia Commons https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svg |
| Date | |
| Soorce | Ain wirk |
| Author | Public-Publicity |
Licensin
The whole drawing is subjected as follow:
- Ye are free:
- tae share – tae copy, distribute an transmit the wirk
- tae remix – tae adapt the wirk
- Unner the follaein condeetions:
- attribution – Ye must attribute the wirk in the manner specified bi the author or licensor (but nae in ony way that suggests that thay endorse ye or yer uise o the wirk).
- share alik – If ye alter, transform, or big upon this wirk, ye mey distribute the resultin wirk anly unner the same or seemilar license tae this ane.
The Screw drawing section is originally made by Wikimedia Commons user Kenfeisel, it's source and lincense are:
- Ye are free:
- tae share – tae copy, distribute an transmit the wirk
- tae remix – tae adapt the wirk
- Unner the follaein condeetions:
- attribution – Ye must attribute the wirk in the manner specified bi the author or licensor (but nae in ony way that suggests that thay endorse ye or yer uise o the wirk).
- share alik – If ye alter, transform, or big upon this wirk, ye mey distribute the resultin wirk anly unner the same or seemilar license tae this ane.
The Bolt drawing section is originally from the user OpenClipart-Vectors at Pixabay, it's source and lincense are:
 |
This file is from Pixabay, where the creator has released it explicitly under the license Creative Commons Zero (see here).
File ID: 2024571 |
 
|
This file is made available under the Creative Commons CC0 1.0 Universal Public Domain Dedication. |
| The person who associated a work with this deed has dedicated the work to the public domain by waiving all of their rights to the work worldwide under copyright law, including all related and neighboring rights, to the extent allowed by law. You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission.
|
 | This file, which was originally posted to Pixabay, was reviewed on 17 August 2019 by reviewer 大诺史, who confirmed that it was available on Pixabay on that date. |
File history
Clap oan ae date/time fer tae see the file aes it kithed at that time.
| Date/Time | Thummnail | Dimensions | Uiser | Comment | |
|---|---|---|---|---|---|
| current | 09:57, 12 Mey 2024 | | 612 × 1,250 (228 KB) | Public-Publicity | small edit |
| 08:43, 12 Mey 2024 |  | 612 × 1,250 (229 KB) | Public-Publicity | little adjustment - gradient | |
| 08:33, 12 Mey 2024 |  | 612 × 1,250 (226 KB) | Public-Publicity | various drawing method enhancements (no significant context changes) | |
| 13:26, 9 Mey 2024 |  | 612 × 1,250 (219 KB) | Public-Publicity | Uploaded own work with UploadWizard |
Eimage airtins
The'r nae pages airts tae this eimage.
Global file uisage
The follaein ither wikis uise this file:
- Uisage on nl.wikipedia.org
